This post was originally written in November of 2017, and probably never finished because Eldore was born just a few days later. The emotional upheaval did recede with his birth, like I thought it would, and we have enjoyed a lovely nearly-nine-months of having him in our family.
Archives for August 2018
Putting beam in vaulted ceiling
We have always wanted to tear down the load bearing wall between our two awkward front rooms and have a vaulted ceiling. With some interesting truss design, we decided to. We called the new space The Colloquium (a place for conversation).
But names and dreams are easy. Bringing those hopes to fruition is the difficult part.
We have been beyond blessed to have a friend whose guidance allowed the dreams to transform into the work. Also, we have had the good fortune of the use of my parents’ house while working on our home. We do sleep in our house, but we cook, eat, work, nap, and do school over at The Ham House.
Here’s a brief visual of the process of vaulting the ceiling and busting at that troublesome load bearing wall.
Choosing a vaulted ceiling beam
One thing that is really important to note is the weight of your roof and the strength of your foundation. Changing the support for your ranch roof can be relatively straight forward if you know what you’re working with. I highly suggest a couple hours of research (I’ve loved this channel) and the advice of an engineer. You can see the place for the beam to sit own at the end of the attic, below. Luckily, the builders didn’t use trusses! We had a rather cavernous attic and knee boards supporting the lower part of the roof.
Since the wall we were tearing out was a load bearing wall, we would need a beam. However, one does not simply just place a beam in the attic. The first step was to decide on a beam. There are a lot of options and after some deliberation we chose an LVL beam. They’re engineered (read: stronger than solid wood) and the literature will show how much they can support. But perhaps more importantly it was the best choice to work with our truss design.
Supporting the vaulted ceiling beam
After we purchased two LVL beams to install in tandem, we took the first step in construction and built two smaller walls at each end of the ceiling to support the beam. Since our beam was extending to the end of the exterior wall on one end, we simply built a wall that vertically tied in the roof to the exterior wall.
The purpose of this was really to build a wall and protect the room from the elements, rather than support the beam. The support for the beam is specifically in the middle of the wall and the weight of that support is distributed on the wall/foundation. Since we have a full basement, there is zero worry of extra stress on the foundation–that’s a nice win!
The blurry part in the foreground is for the other end of the beam.
A hole in the ceiling–a preview of things to come.
Installing beam in vaulted ceiling
Oh man were we racking our minds on how we were going to get that beam in the attic! Pulleys, ladders, skid steers, etc… were all in the mix. Finally, with the aide of another friend, we tore off some siding on the end of our home, slide the beam in and sealed it back up!
This whole process only took a couple hours, and man, do I want one of those tractors!
Removing Load Bearing Wall
After securing the lvl beam, we proceeded to remove the wall! The moment we’ve been waiting for! So, we hung a tarp to keep the dust out of the rest of the house. That vintage, 60’s dust.
Then we proceeded to remove the ceiling joists and make room for our truss design. We have great plans for repurposing these joists.
The kids got to help too.
While probably not necessary, we decided to tie in the roof to the beam with scissor trusses. This will give the roof extra stability and depth for cellulose insulation.
In the picture below, there are some 2x4x15s stretched from the outer wall to a shelf we made on the lvl beam. After they were aligned, we “tied” the 2x4s into the rafters with some left over lumber.
Then we removed the skeletal remains of the wall.
What was easily the most intense and daunting phase of the process was actually probably the quickest. In total, we took three weeks to remove the wall and vault the ceiling. After that comes windows and door replacement, insulation, drywall, flooring, ceiling, and of course floorplans and the like, and gathering the cabinetry and appliances for the kitchen.